Page 63 - Granville mode d'emploi_EN_HD

SUSPENSION SEAT POSTS
Suspension seat posts (d) enhance the cyclist’s comfort when riding on rough ground. They can be used on roads and field tracks. The seat posts are usually designed for a cyclist of average weight, i.e. 75 kilograms. Their shock-absorbing properties can be modified either by adjusting the spring preload and/or by replacing the springs. Typically, for this purpose the seat post must be removed from the frame. The adjustment is made by a bolt which is screwed into the seat post at its lower end. Ask your GRANVILLE dealer to explain you the basic setting.
WARNING
Be sure not to pull out the seat post too far. The mark on the seat post (e) (end, min, max, stop, limit etc.) should always remain within the seat tube.
SAFETY INSTRUCTIONS
Seat post manufacturers normally include instructions with their deliveries. Read them carefully before changing any settings or doing any maintenance work on your suspen- sion seat post.
Check and maintenance
Hold the saddle at the back and front and tug it crossways to the direction of travel (f). Check in this way if the suspension mechanism of the seat post has any sideways play. If you notice any play, have it checked and, if necessary, reduced by your GRANVILLE dealer.
SAFETY INSTRUCTIONS
Have the seat post checked once a year by your GRANVILLE dealer.
d
e
f
ORIGINAL OPERATING INSTRUCTIONS | 63 |